Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

HBLFSSW8-SEP

Applicable Frame Width type Mounting Hole Alteration for Covers Accessory CAD Days to Ship

Specification/Dimensions

Applicable Frame Width(mm)
40

45

50

60

80

100

120

160

180

200
Clear
type
- HBLFSSW8
Clear
Mounting Hole Alteration for Covers
- C (Tap for Cover Mounting)
- Not Provided
Clear
Accessory
- Not Provided
- SEC (Screws with Captured Washers and Nuts Set)
- SEP (Screws, Post-Assembly Insertion Spring Nuts Set)
- SET (Screws, Nuts Set)
- SEU (Screws, Pre-Assembly Insertion Spring Nuts Set)
- SSP (Set of Stainless Steel Screw and Post-assy. Insertion Spring Nut)
- SST (Set of Stainless Steel Screws and Nuts)
- SSU (Set of Stainless Steel Screws and Pre-Assembly Insertion Spring Nuts)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

7 Day(s) or Less
Clear

Specify Alterations

8 Series (Groove Width 10 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type (HBLFSSW8-SEP)

Name: 8 Series (Groove Width 10 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type
Brand: MISUMI
Price: 400.72 INR
Availability: PreOrder

8 Series (Groove Width 10 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type (HBLFSSW8-SEP)

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Brand :

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

A bracket with 2 mounting holes on 1 side. You can connect the frame more firmly.

Dimensional Drawing of 90 degree Brackets

HBLFSSW8

8 Series (groove width 10 mm) - For single row grooves - Reversed bracket with protrusion: Related images

[ ! ] For the squareness of the 90 degree Brackets, please refer to the squareness tolerance table
. [ M ]Material: ADC12

Specification Table of 90 degree Brackets

Model

HBLFSSW8

・The price list below is current as of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.

Model	Mass (g)	Suitable bolts and T-nuts				Allowable load (N)
Model	Mass (g)	bolt	Quantity	T-Nut	Quantity	Allowable load (N)
HBLFSSW8	105	CBM8-20	4	HNTT8-8	4	3087

[ ! ] When ordering bolts and nuts as a set, please check the additional processing "Applicable bolts and nuts set."

Additional Processing of 90 degree Brackets

Model	−	(C・SET・SST・SEU・SSU・SEP・SSP・SEC)
HBLFSSW8 HBLFSSW8	− −	SET C-SET

Alterations	Code	Spec.	Applicable bracket
Additional cover mounting holes	C	The 90 degree Brackets is tapped for mounting the cover (M5 on both sides) (Mounting screws are HCBM) .	HBLFSH8
			HBLFSSW8

How to Use

■ Cover installation example ● Please specify
alteration code -C .

(P.798)

Alterations

Code

Spec.

Applicable bracket

Applicable bolts
and nuts included

SET
SST
(stainless steel)
SEU
(pre-
assembly spring nut)
SSU
(pre-assembly
spring nut
stainless steel)
SEP
(post-
assembly spring nut)
SSP
(post-assembly
spring nut stainless
steel)
SEC
(bolt and nut with washer)

The applicable bolts and nuts for attaching the 90 degree Brackets to the frame are included in the set. (Added to the bracket price)

(Example) When HBLFSSW8 is specified

	bolt		nut
Code	Model	Quantity	Model	Quantity
SET	CBM8-20	4	HNTT8-8	4
SST	SCB8-20		HNTTSN8-8
SEU	CBM8-20		HNTU8-8
SSU	SCB8-20		SHNTU8-8
SEP	CBM8-20		HNTP8-8
SSP	SCB8-20		SHNTP8-8
SEC	HCBST8-24		HNTT8-8

[ ! ] When specifying a part other than HBLFSSW8, please check the applicable bolts and nuts.

HBLFSH8

HBLFSSW8

[ ! ] When -SET, -SEU, or -SEP is specified, the included bolts are not RoHS compliant.

Additional Processing Details of 90 degree Brackets

■ Hole processing for cover installation (-C) of 90 degree Brackets

You can add M5 tapped holes on both sides.
Example of additional machining model: HBLFSSW8-C

■ Details 90 degree Brackets of applicable bolt and nut sets

Additional processing model	bolt		nut
Additional processing model	Model	Material	type	Model	Material	Stopper
SET	CBM8-20	iron	First in	HNTT8-8	iron	none
SST	SCB8-20	stainless	First in	HNTTSN8-8	stainless	none
SEU	CBM8-20	iron	First in	HNTU8-8	iron	Yes
SSU	SCB8-20	stainless	First in	SHNTU8-8	stainless	Yes
SEP	CBM8-20	iron	Later insertion	HNTP8-8	iron	Yes
SSP	SCB8-20	stainless	Later insertion	SHNTP8-8	stainless	Yes
SEC	HCBST8-24	Iron (with washer)	First in	HNTT8-8	iron	none

How to Use of 90 degree Brackets

Features of 90 degree Brackets: This type has a protrusion that fits into the frame groove.
The protrusion acts as a rotation stopper during fastening work, making it easy to work with.

Intersecting frames
are also possible.

Technical Information of 90 degree Brackets

■ For the squareness of the square 90 degree Brackets, please check the squareness tolerance table .

■ 90 degree Brackets allowable load concept

As shown in the left figure, two frames are set up, a frame is placed between them, and two 90 degree Brackets are attached underneath, and the allowable load per unit is shown. The allowable load
here indicates the load at which the 90 degree Brackets can maintain its position (without breaking or slipping) when all mounting holes on the bracket are fixed with bolts and a load is applied.

How to Install Bolt with Washer (-SEC) of 90 degree Brackets

■ How to install the 90 degree Brackets for aluminum frames that comes with a set of bolts with spring washers (-SEC)
Compared to other series of sets with bolts with spring washers, this product requires more care when tightening because the bolt heads interfere with each other.
We will introduce how to install it.

STEP 1 Installation sequence

STEP 2 Tightening the hexagonal bolts

Tighten the hexagonal bolt securely. Related image 1_Installation method: Related image

Of the two holes, installation will be done through the hole mentioned above.

STEP 3 Adjust the position of the spring washer on the bolt

Then, press down on the spring washer part of the bolt with your hand.If you leave it in this state when you try to tighten the remaining bolts
, the heads of the previously tightened bolts
will interfere and installation will be impossible. Related image 1_Installation method: Related image

STEP 4 Tighten the hex bolt.
Finally, tighten the hex bolt by twisting it.

As shown above, care must be taken when attaching washers to the 8 series protruding inverted 90 degree Brackets.
In cases where it is difficult to pre-tighten one side, we recommend using the following products.

<Alternatives>
Case 1: When changing the bolts without changing the bracket
HBLFSSW8-SET (changing the bolt and nut set applicable for additional work)

Case 2: When changing the bracket without changing the bolt with spring washer
HBLFSH8-SEC (changing to a one-sided oblong hole bracket)
The hole on one side of the bracket is an oblong hole, so even if a hexagonal bolt with an integrated washer is used, the bolt head will not interfere with installation.

Similar Products of 90 degree Brackets

■ 90 degree Brackets with protrusion

There is a protrusion on the mounting surface to prevent rotation.

Product name	Inverted bracket with protrusion	Single Rib Bracket	Bracket with protrusion on one side	Nut stop bracket	Bracket with cover	Single-sided slotted bracket
Product Photos			No protrusions on one side, can be connected to plate
Material	ADC12	ADC12	ADC12	ADC12	ADC12	ADC12
Features	The mounting surface has a protrusion, making it easy to position when mounting. This is the most conventional type.	This type has a rib (side) on only one side, making it easy to turn the hex wrench.	The protrusion is on one side only and is useful when connecting frames/plates.	The long protrusion serves as the nut lock, eliminating the need for fine adjustment of the nut position.	This type is equipped with a dustproof cover. Dust does not accumulate inside, making it hygienic.	One side has an elongated hole. The bolt head does not interfere even when using a washer assembled bolt.
Representative Model	HBLFSNK8	HBLFSL8	HBLFSNK8	HBLFSR8	HBLFSNT8	HBLFSH8

Related Items of 90 degree Brackets

■ 8 Series of 90 degree Brackets

Product name	Aluminum frame	Blind Joint	Frame cap	Groove cover	nut
photograph
Product page	Here	Here	Here	Here	Here

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
HBLFSSW8-SEP

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Applicable Frame Width (mm)	Mounting Hole Alteration for Covers	Accessory
	₹ 400.72	1 Piece(s)	Available	7 Day(s) or more	-	-	Not Provided	SEP (Screws, Post-Assembly Insertion Spring Nuts Set)

Product TOP

Basic Information

Bracket Tape	Tabbed Brackets	Additional Functions (Tabbed Bracket)	Standard	Tab Position	Tabbed at Both Sides
Number of the Applicable Slots	1 Slot	Perpendicularity	No Standard	Series	MISUMI Brackets for 8 Series (Extrusion Slot Width 10mm)
Material	ADC12	Extrusion Series	HFS	Extrusion No.	8
Extrusion Size	For 40 and 80	Bracket Type	Tabbed Reversal Brackets	Applicable Screws	M8 Screws
Number of Extrusion Connection Holes	4

Please check the type/dimensions/specifications of the part HBLFSSW8-SEP in the 8 Series (Groove Width 10 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Product variants

Part Number
HBLFSSW8-C-SEP
HBLFSSW8-C-SET
HBLFSSW8-C-SEU
HBLFSSW8-SET
HBLFSSW8-SEU
HBLFSSW8-SSP

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Applicable Frame Width (mm)	Mounting Hole Alteration for Covers	Accessory
₹ 429.29	1 Piece(s)	Available	7 Day(s) or more	-	-	C (Tap for Cover Mounting)	SEP (Screws, Post-Assembly Insertion Spring Nuts Set)
₹ 392.15	1 Piece(s)	Available	7 Day(s) or more	-	-	C (Tap for Cover Mounting)	SET (Screws, Nuts Set)
₹ 429.29	1 Piece(s)	Available	7 Day(s) or more	-	-	C (Tap for Cover Mounting)	SEU (Screws, Pre-Assembly Insertion Spring Nuts Set)
₹ 363.58	1 Piece(s)	Available	7 Day(s) or more	-	40 ～ 200	Not Provided	SET (Screws, Nuts Set)
₹ 400.72	1 Piece(s)	Available	7 Day(s) or more	-	-	Not Provided	SEU (Screws, Pre-Assembly Insertion Spring Nuts Set)
₹ 525.92	1 Piece(s)	Available	7 Day(s) or more	-	-	Not Provided	SSP (Set of Stainless Steel Screw and Post-assy. Insertion Spring Nut)

Search by Category / Brand

Search by Category

How can we improve?