Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

HBLFSSW6-50-SEP

Applicable Frame Width type Surface Treatment Extrusion Size Mounting Hole Alteration for Covers Accessory CAD Days to Ship

Specification/Dimensions

Applicable Frame Width(mm)
30

50

60

90

100

300
Clear
type
- HBLFSSW6
- HBLFSSW6-50
- HBLFSSWB6
Clear
Surface Treatment
- Black Anodize
- Not Provided
Clear
Extrusion Size
- For 30 and 60
- For 50 Sq.
Clear
Mounting Hole Alteration for Covers
- C (Tap for Cover Mounting)
- Not Provided
Clear
Accessory
- Not Provided
- SEC (Screws with Captured Washers and Nuts Set)
- SEP (Screws, Post-Assembly Insertion Spring Nuts Set)
- SET (Screws, Nuts Set)
- SEU (Screws, Pre-Assembly Insertion Spring Nuts Set)
- SSP (Set of Stainless Steel Screw and Post-assy. Insertion Spring Nut)
- SST (Set of Stainless Steel Screws and Nuts)
- SSU (Set of Stainless Steel Screws and Pre-Assembly Insertion Spring Nuts)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

7 Day(s) or Less
Clear

Specify Alterations

6 Series (Groove Width 8 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type (HBLFSSW6-50-SEP)

Name: 6 Series (Groove Width 8 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type
Brand: MISUMI
Price: 312.86 INR
Availability: PreOrder

6 Series (Groove Width 8 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type (HBLFSSW6-50-SEP)

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Brand :

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

A reversing bracket with protrusions that has 2 mounting holes on 1 side. You can connect the frame more firmly.

Dimensional Drawing of 90 degree Brackets

HBLFSSW6
HBLFSSWB6 (Black anodized)

For 50mm square
HBLFSSW6-50

6 Series (groove width 8 mm) - For single row grooves - Reversed bracket with protrusion: Related images

Type	[M] Material	[S] Surface Treatment
HBLFSSW6	ADC12	−
HBLFSSWB6		Black Anodized
HBLFSSW6-50		−

Specification Table of 90 degree Brackets

Model

HBLFSSW6

・The price list below is current as of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.

Model	Mass (g)	Suitable bolts and T-nuts				Allowable load (N)
Type		bolt	Quantity	T-Nut	Quantity
HBLFSSW6	37	CBM6-12	4	HNTT6-6	4	1764
HBLFSSWB6 ^* (Black anodized)
HBLFSSW6-50	27

[ ! ] When ordering bolts and nuts as a set, please check the additional processing "Applicable bolts and nuts set."

Additional Processing of 90 degree Brackets

Model	−	(C・SET・SST・SEU・SSU・SEP・SSP・SEC)
HBLFSSW6	−	SET
HBLFSSW6	−	C - SET

Alterations	Code	Spec.	Applicable bracket
Additional cover mounting holes	C	The 90 degree Brackets is tapped for mounting the cover (M5 on both sides) (Mounting screws are HCBM) .	HBLFSNT6
			HBLFSSW6
			HBLFSSWB6
			HBLFSSW6-50

■ C hole alteration
(cover installation example)
●Please specify alteration code -C.

6 Series (groove width 8 mm) - For single row grooves - Bracket with protrusion: Related images

Alterations

Code

Spec.

Applicable bracket

Applicable bolts
and nuts included

SET
SST
(stainless steel)
SEU
(pre-
assembly spring nut)
SSU
(pre-assembly
spring nut
stainless steel)
SEP
(post-
assembly spring nut)
SSP
(post-assembly
spring nut stainless
steel)
SEC ( bolt and nut
with washer )

The applicable bolts and nuts for attaching the 90 degree Brackets to the frame are included in the set.
(Added to the bracket price)

(Example) When HBLFSSW6 is specified

	bolt		nut
Code	Model	Quantity	Model	Quantity
SET	CBM6-12	4	HNTT6-6	4
SST	SCB6-12		HNTTSN6-6
SEU	CBM6-12		HNTU6-6
SSU	SCB6-12		SHNTU6-6
SEP	CBM6-12		HNTP6-6
SSP	SCB6-12		SHNTP6-6
SEC	HCBST6-15		HNTT6-6

[ ! ] When specifying a type other than HBLFSSW6,
please check the applicable bolts and nuts.

HBLFSNT6

HBLFSSW6

HBLFSSWB6

HBLFSSW6-50

[ ! ] Black anodized bolts are HCBMTB (black trivalent chromate). [ ! ] When specifying -SET, -SEU, or -SEP for a bracket other than black anodized, the included bolts are not RoHS compliant. [ ! ] For set combinations, see "Details of Applicable Bolt and Nut Sets" below.

■ Hole processing for cover installation (-C) of 90 degree Brackets

You can add M5 tapped holes on both sides.
Example of additional machining model: HBLFSSW6-C

■ Details 90 degree Brackets of applicable bolt and nut sets

Additional processing model	bolt		nut
Additional processing model	Model	Material	type	Model	Material	Stopper
SET	CBM6-12	iron	First in	HNTT6-6	iron	none
SST	SCB6-12	stainless	First in	HNTTSN6-6	stainless	none
SEU	CBM6-12	iron	First in	HNTU6-6	iron	Yes
SSU	SCB6-12	stainless	First in	SHNTU6-6	stainless	Yes
SEP	CBM6-12	iron	Later insertion	HNTP6-6	iron	Yes
SSP	SCB6-12	stainless	Later insertion	SHNTP6-6	stainless	Yes
SEC	HCBST6-15	Iron (with washer)	First in	HNTT6-6	iron	none

How to Use of 90 degree Brackets

90 degree Brackets, This type has a protrusion that fits into the frame groove.
90 degree Brackets, The protrusion acts as a rotation stopper during fastening work, making it easy to work with.
90 degree Brackets, It can be connected in either an L-shaped or cross-shaped configuration.

Intersecting frames
are also possible.

Type	Surface Treatment	Supported Frames
HBLFSSW6	-	6 series, 30mm square and 60mm square
HBLFSSWB6	Black Anodized	6 series, 30mm square and 60mm square
HBLFSSW6-50	-	For 6 series 50 square

Technical Information of 90 degree Brackets

■ 90 degree Brackets allowable load concept

As shown in the left figure, two frames are set up, a frame is placed between them, and two 90 degree Brackets are attached underneath, and the allowable load per unit is shown. The allowable load
here indicates the load at which the 90 degree Brackets can maintain its position (without breaking or slipping) when all mounting holes on the bracket are fixed with bolts and a load is applied.

How to Install the Washer and Bolt Set (-SEC) of 90 degree Brackets

■ How to install aluminum frame 90 degree Brackets that come with a set of spring washer bolts (-SEC)
Compared to other series of spring washer bolt sets, this product requires more care when tightening because the bolt heads interfere with each other.
We will introduce how to install.

STEP 1 Installation sequence

STEP 2 Tightening the hexagonal bolts

Tighten the hexagonal bolt securely. Related image 1_Installation method: Related image

Of the two holes, installation will be done through the hole mentioned above.

STEP 3 Adjust the position of the spring washer on the bolt

Then, press down on the spring washer part of the bolt with your hand.If you leave it in this state when you try to tighten the remaining bolts
, the heads of the previously tightened bolts
will interfere and installation will be impossible. Related image 1_Installation method: Related image

STEP 4 Tighten the hex bolt.
Finally, tighten the hex bolt by twisting it.

As you can see, care must be taken when attaching the washer.
In cases where it is difficult to pre-tighten one side, we recommend using the following product.

<Alternatives>
Case 1: When changing the bolt without changing the 90 degree Brackets
HBLFSSW6-SET (changing the bolt and nut set that is applicable for additional work)

Case 2: When changing the 90 degree Brackets without changing the bolt with spring washer
HBLFSH6-SEC (changing to a one-sided oblong hole bracket)
The hole on one side of the bracket is an oblong hole, so even if you use a hexagonal bolt with an integrated washer, the bolt head will not interfere with installation.

Similar Products of 90 degree Brackets

■ 90 degree Brackets with protrusion

There is a protrusion on the mounting surface to prevent rotation.

Product name	Inverted bracket with protrusion	Single Rib Bracket	Nut stop bracket	Bracket with protrusion on one side	Single-sided slotted bracket	Bracket with cover
Product Photos				No protrusions on one side, can be connected to plate
Material	ADC12	ADC12	ADC12	ADC12	ADC12	ADC12
Features	The mounting surface has a protrusion, making it easy to position when mounting. This is the most conventional type.	This type has a rib (side) on only one side, making it easy to turn the hex wrench.	The long protrusion serves as the nut lock, eliminating the need for fine adjustment of the nut position.	The protrusion is on one side only and is useful when connecting frames/plates.	One side has an elongated hole. The bolt head does not interfere even when using a washer assembled bolt.	This type is equipped with a dustproof cover. Dust does not accumulate inside, making it hygienic.
Representative Model	HBLFSN6	HBLFSL6	HBLFSR6	HBLFSNK6	HBLFSH6	HBLFSNT6

Related Items of 90 degree Brackets

■ 6 Series (groove width 8mm) of 90 degree Brackets

Product name	Aluminum frame	Blind Joint	Frame cap	Groove cover	nut
photograph
Product page	Here	Here	Here	Here	Here

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
HBLFSSW6-50-SEP

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Applicable Frame Width (mm)	Surface Treatment	Extrusion Size	Mounting Hole Alteration for Covers	Accessory
	₹ 312.86	1 Piece(s)	Available	7 Day(s) or more	-	-	Not Provided	For 50 Sq.	Not Provided	SEP (Screws, Post-Assembly Insertion Spring Nuts Set)

Product TOP

Basic Information

Bracket Tape	Tabbed Brackets	Additional Functions (Tabbed Bracket)	Standard	Tab Position	Tabbed at Both Sides
Number of the Applicable Slots	1 Slot	Perpendicularity	No Standard	Series	MISUMI Brackets for 6 Series (Extrusion Slot Width 8mm)
Material	ADC12	Extrusion Series	HFS	Extrusion No.	6
Bracket Type	Tabbed Reversal Brackets	Applicable Screws	M6 Screws	Number of Extrusion Connection Holes	8

Please check the type/dimensions/specifications of the part HBLFSSW6-50-SEP in the 6 Series (Groove Width 8 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Product variants

Part Number
HBLFSSW6-50-C-SEC
HBLFSSW6-50-C-SEP
HBLFSSW6-50-C-SET
HBLFSSW6-50-SET
HBLFSSW6-50-SEU
HBLFSSW6-50-SSP

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Applicable Frame Width (mm)	Surface Treatment	Extrusion Size	Mounting Hole Alteration for Covers	Accessory
₹ 391.44	1 Piece(s)	Available	7 Day(s) or more	10	-	Not Provided	For 50 Sq.	C (Tap for Cover Mounting)	SEC (Screws with Captured Washers and Nuts Set)
₹ 348.58	1 Piece(s)	Available	7 Day(s) or more	-	-	Not Provided	For 50 Sq.	C (Tap for Cover Mounting)	SEP (Screws, Post-Assembly Insertion Spring Nuts Set)
₹ 311.43	1 Piece(s)	Available	7 Day(s) or more	-	-	Not Provided	For 50 Sq.	C (Tap for Cover Mounting)	SET (Screws, Nuts Set)
₹ 275.72	1 Piece(s)	Available	7 Day(s) or more	-	30 ～ 300	Not Provided	For 50 Sq.	Not Provided	SET (Screws, Nuts Set)
₹ 349.04	1 Piece(s)	Available	7 Day(s) or more	-	-	Not Provided	For 50 Sq.	Not Provided	SEU (Screws, Pre-Assembly Insertion Spring Nuts Set)
₹ 560.00	1 Piece(s)	Available	7 Day(s) or more	-	-	Not Provided	For 50 Sq.	Not Provided	SSP (Set of Stainless Steel Screw and Post-assy. Insertion Spring Nut)

Search by Category / Brand

Search by Category

How can we improve?