Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(18 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

FSXC80-A-[M,N]-S-G

Specification/Dimensions

Table Size (Length) L (Range Selectable)(mm)
~25

26~40

41~60

61~90
Clear
Table Size (Width) W (Range Selectable)(mm)
~25

26~40

41~60

61~90
Clear
Load Capacity (Range Selectable)(N)
- 5~30
- 30.1~50
- 50.1~100
- 100.1~
Clear
Travel Distance (Y-Axis) (Range Selectable)(mm)
Up to ±10mm

±10 to 30mm
Clear
Table Material
- Stainless Steel
  - SUS440C
- Aluminum Alloy
Clear
Table Surface Treatment
- Black Anodize
- 无电解镀镍
Clear
Travel Guide
- Cross Roller
- Linear Ball
Clear
Table Size (Thickness) H (Range Selectable)(mm)
1~15

15.1~20

20.1~25

30.1~35

35.1~40
Clear
Table Size (Length) L(mm)
25

40

50

60

70

80
Clear
Table Size (Width) W(mm)
25

40

50

60

70

80
Clear
Load Capacity(N)
9.8

19.6

38.2

39.2

49

95.2

98

144.2

147

192.1

196

219.7

225.4

255.8

264.6
Clear
Travel Distance (X-Axis)(mm)
±3.2

±6.5

±12.5
Clear
Travel Distance (Y-Axis)(mm)
±3.2

±6.5

±12.5
Clear
Table Size (Thickness) H(mm)
12

15

16

18

20

24

32

36

40
Clear
Travel Distance (Z-Axis)(mm)
±3.2

±6.5

±12.5
Clear
Feed Knob Position
- Center
- Side
Clear
Reversed
- Standard
- Right and Left
- Up/Down
- Top/Bottom, Right/Left
Clear
Clamp Method Selection
- Disc Clamp [H]
- Opposed Clamp [P]
- Standard [S]
Clear
Feeding Method Selection
- Feed Screw Pitch 0.5 [B]
- Screw with Hex Socket, Pitch 0.5 [F]
- Feed Screw Pitch 1.0 [J]
- Coarse/Fine Micrometer Head [M]
- Digital Micrometer Head [D]
- Standard Micrometer Head [N]
Clear
Grease Selection
- G (Standard)
- R (For Clean Environment)
Clear
type
- FSXC
- FSXR
- FSXYR
- FSZR
Clear
Travel Distance (X-Axis) (Range Selectable)(mm)
Up to ±10mm

±10 to 30mm
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Day(s) or Less
Clear

Specify Alterations

[High Precision] X / XY / Z-Axis Stages - Selectable

Name: [High Precision] X / XY / Z-Axis Stages - Selectable
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

FSXC80-A-[M,N]-S-G

FSXC80-AR-[M,N]-S-G

FSXC80-AZ-N-S-G

FSXC80-C-[M,N]-S-G

FSXC80-CR-[M,N]-S-G

FSXC80-CZ-N-S-G

FSXR80-A-[B,D,F,J,M,N]-[H,S]-[G,R]

FSXR80-AR-[B,D,F,J,M,N]-[H,S]-[G,R]

FSXR80-AZ-[B,F,J,M,N]-[H,S]-[G,R]

FSXR80-AZR-[B,F,J,M,N]-[H,S]-[G,R]

FSXR80-C-[B,D,F,J,M,N]-[H,S]-[G,R]

FSXR80-CR-[B,F,J,M,N]-[H,S]-[G,R]

FSXR80-CZ-[B,F,J,M,N]-[H,S]-[G,R]

FSXR80-CZR-[B,F,J,M,N]-[H,S]-[G,R]

FSXYR80-A-[B,D,F,J,M,N]-S-[G,R]

FSXYR80-AR-[B,D,F,J,M,N]-S-[G,R]

FSXYR80-C-[B,F,J,M,N]-[H,S]-[G,R]

FSXYR80-CR-[B,F,J,M,N]-[H,S]-[G,R]

FSXC80-A-[M,N]-S-G

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.

Product Description

You can freely choose the feed position, feed method, clamp method, and type of grease.

Product TOP

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
FSXC80-A-[M,N]-S-G
FSXC80-AR-[M,N]-S-G
FSXC80-AZ-N-S-G
FSXC80-C-[M,N]-S-G
FSXC80-CR-[M,N]-S-G
FSXC80-CZ-N-S-G
FSXR80-A-[B,D,F,J,M,N]-[H,S]-[G,R]
FSXR80-AR-[B,D,F,J,M,N]-[H,S]-[G,R]
FSXR80-AZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-AZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-C-[B,D,F,J,M,N]-[H,S]-[G,R]
FSXR80-CR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-CZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR80-CZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXYR80-A-[B,D,F,J,M,N]-S-[G,R]
FSXYR80-AR-[B,D,F,J,M,N]-S-[G,R]
FSXYR80-C-[B,F,J,M,N]-[H,S]-[G,R]
FSXYR80-CR-[B,F,J,M,N]-[H,S]-[G,R]

Price	Minimum Order Qty.	Days to Ship	RoHS	Table Size (Length) L (Range Selectable) (mm)	Table Size (Width) W (Range Selectable) (mm)	Load Capacity (Range Selectable) (N)	Travel Distance (X-Axis) (Range Selectable) (mm)	Travel Distance (Y-Axis) (Range Selectable) (mm)	Table Material	Table Surface Treatment	Travel Guide	Table Size (Thickness) H (Range Selectable) (mm)	Table Size (Length) L (mm)	Table Size (Width) W (mm)	Load Capacity (N)	Travel Distance (X-Axis) (mm)	Travel Distance (Y-Axis) (mm)	Table Size (Thickness) H (mm)	Travel Distance (Z-Axis) (mm)	Table Parallelism (µm)	Moment Rigidity (Pitching) ("/N•cm)	Moment Rigidity (Yawing) ("/N•cm)	Moment Rigidity (Rolling) ("/N•cm)	Feed Knob Position	Reversed	Clamp Method Selection	Feeding Method Selection	Grease Selection
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Standard	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Right and Left	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Up/Down	Standard [S]	Standard Micrometer Head [N]	G (Standard)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Standard	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Right and Left	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Up/Down	Standard [S]	Standard Micrometer Head [N]	G (Standard)
-	1 Piece(s)	10 Day(s) or more	-	61~90	61~90	100.1~	±10 to 30mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Standard	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
-	1 Piece(s)	10 Day(s) or more	-	61~90	61~90	100.1~	±10 to 30mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Right and Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	100.1~	±10 to 30mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Up/Down	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	100.1~	±10 to 30mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Center	Top/Bottom, Right/Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	100.1~	±10 to 30mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Standard	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	100.1~	±10 to 30mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Right and Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	100.1~	±10 to 30mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Up/Down	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	100.1~	±10 to 30mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	80	80	264.6	±12.5	-	20	-	20	0.04	0.04	0.02	Side	Top/Bottom, Right/Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
-	1 Piece(s)	10 Day(s) or more	-	61~90	61~90	100.1~	±10 to 30mm	±10 to 30mm	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	35.1~40	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Center	Standard	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
-	1 Piece(s)	10 Day(s) or more	-	61~90	61~90	100.1~	±10 to 30mm	±10 to 30mm	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	35.1~40	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Center	Right and Left	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	100.1~	±10 to 30mm	±10 to 30mm	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	35.1~40	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Side	Standard	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
-	1 Piece(s)	10 Day(s) or more	10	61~90	61~90	100.1~	±10 to 30mm	±10 to 30mm	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	35.1~40	80	80	255.8	±12.5	±12.5	40	-	40	0.06	0.08	0.06	Side	Right and Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)

Basic Information

Through Hole (Table Center Hole)	Not Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?

Configure

Specification/Dimensions

Table Size (Length) L (Range Selectable)(mm)

Table Size (Width) W (Range Selectable)(mm)

Load Capacity (Range Selectable)(N)

Travel Distance (Y-Axis) (Range Selectable)(mm)

Table Material

Table Surface Treatment

Travel Guide

Table Size (Thickness) H (Range Selectable)(mm)

Table Size (Length) L(mm)

Table Size (Width) W(mm)

Load Capacity(N)

Travel Distance (X-Axis)(mm)

Travel Distance (Y-Axis)(mm)

Table Size (Thickness) H(mm)

Travel Distance (Z-Axis)(mm)

Feed Knob Position

Reversed

Clamp Method Selection

Feeding Method Selection

Grease Selection

type

Travel Distance (X-Axis) (Range Selectable)(mm)

CAD

Days to Ship

Specify Alterations

[High Precision] X / XY / Z-Axis Stages - Selectable

Copy Part Number URL to Clipboard

(i) Caution

Product Description

Part Number

Basic Information

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで

(i)
Caution