STRAIGHT EJECTOR SLEEVES & STRAIGHT CENTER PIN SETS -DIN Type/SKD61 equivalent Hardened-

Part Number

Configured Part Number is shown.

 
Part Number
D-ESDP4-[40-200/0.01]-[1.5-2.5/0.1]-S[20-100/1]-X[60-300/5]
D-ESDP4.5-[40-200/0.01]-[1.5-3/0.1]-S[20-100/1]-X[60-300/5]
D-ESDP5-[40-300/0.01]-[2-3.5/0.1]-S[20-100/1]-X[60-400/5]
D-ESDP5.5-[40-300/0.01]-[2-4/0.1]-S[20-100/1]-X[60-400/5]
D-ESDP6-[40-450/0.01]-[2-4.5/0.1]-S[20-100/1]-X[60-550/5]
D-ESDP6.5-[40-450/0.01]-[2-4.5/0.1]-S[20-100/1]-X[60-550/5]
D-ESDP7-[40-450/0.01]-[2-5/0.1]-S[20-100/1]-X[60-550/5]
D-ESDP7.5-[40-450/0.01]-[2-5.5/0.1]-S[20-100/1]-X[60-550/5]
D-ESDP8-[70-500/0.01]-[2-6/0.1]-S[20-100/1]-X[90-600/5]
D-ESDP9-[70-500/0.01]-[2.5-7/0.1]-S[20-100/1]-X[90-600/5]
D-ESDP10-[70-500/0.01]-[2.5-8/0.1]-S[20-100/1]-X[90-600/5]
D-ESDP12-[70-500/0.01]-[2.5-10/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP12-[500.1-800/0.1]-[2.5-10/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP15-[70-500/0.01]-[2.5-12/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP15-[500.1-800/0.1]-[2.5-12/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP16-[70-500/0.01]-[3-13/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP16-[500.1-800/0.1]-[3-13/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP20-[100-500/0.01]-[3-16/0.1]-S[20-100/1]-X[120-900/5]
D-ESDP20-[500.1-800/0.1]-[3-16/0.1]-S[20-100/1]-X[120-900/5]
Part NumberVolume DiscountDays to ShipHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm)
V (Hole diameter)
(mm)
L (L dimension)
(mm)
S(V hole diameter length)
(mm)
X(Full length of the center pin)
(mm)
15 Day(s) 3mm-0.04/-0.01241.5 ~ 2.540 ~ 20020 ~ 10060 ~ 300
15 Day(s) 3mm-0.04/-0.0124.51.5 ~ 340 ~ 20020 ~ 10060 ~ 300
15 Day(s) 3mm-0.04/-0.01252 ~ 3.540 ~ 30020 ~ 10060 ~ 400
15 Day(s) 3mm-0.04/-0.0125.52 ~ 440 ~ 30020 ~ 10060 ~ 400
15 Day(s) 5mm-0.005/-0.01462 ~ 4.540 ~ 45020 ~ 10060 ~ 550
15 Day(s) 5mm-0.005/-0.0146.52 ~ 4.540 ~ 45020 ~ 10060 ~ 550
15 Day(s) 5mm-0.005/-0.01472 ~ 540 ~ 45020 ~ 10060 ~ 550
15 Day(s) 5mm-0.005/-0.0147.52 ~ 5.540 ~ 45020 ~ 10060 ~ 550
15 Day(s) 5mm-0.005/-0.01482 ~ 670 ~ 50020 ~ 10090 ~ 600
15 Day(s) 5mm-0.005/-0.01492.5 ~ 770 ~ 50020 ~ 10090 ~ 600
15 Day(s) 5mm-0.006/-0.017102.5 ~ 870 ~ 50020 ~ 10090 ~ 600
15 Day(s) 7mm-0.006/-0.017122.5 ~ 1070 ~ 50020 ~ 10090 ~ 900
15 Day(s) 7mm-0.006/-0.017122.5 ~ 10500.1 ~ 80020 ~ 10090 ~ 900
15 Day(s) 7mm-0.006/-0.017152.5 ~ 1270 ~ 50020 ~ 10090 ~ 900
15 Day(s) 7mm-0.006/-0.017152.5 ~ 12500.1 ~ 80020 ~ 10090 ~ 900
15 Day(s) 7mm-0.006/-0.017163 ~ 1370 ~ 50020 ~ 10090 ~ 900
15 Day(s) 7mm-0.006/-0.017163 ~ 13500.1 ~ 80020 ~ 10090 ~ 900
15 Day(s) 8mm-0.007/-0.020203 ~ 16100 ~ 50020 ~ 100120 ~ 900
15 Day(s) 8mm-0.007/-0.020203 ~ 16500.1 ~ 80020 ~ 100120 ~ 900

Loading...

  1. 1

Basic Information

Brand MISUMI Product composition Center pin sets Material SKD61
Surface treatment No Concentricity between the hole and shaft diameters ◎0.08 Inner dia. tolerance H7
Tapered or not No Center pin tip shape No

Additional Products in this Category

Tech Support

Mold
TEL:124- 468-8824 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)