Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 26/5/2024 to 4:30 (IST) 27/5/2024. We apologize for the inconvenience.
Due to the state election, our head office and warehouse in Gurgaon will be closed on Saturday, May 25th.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(218 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

L-CPHB-1DR5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-VC[1-1.49/0.01]-C[0.1-2.2/0.1]-Q[0.2-2.7/0.1]

Specification/Dimensions

Material
- SKH51
- SKD61
Clear
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
Clear
L dimension tolerance
- +0.02/0
- 0/-0.1
Clear
Tip gradient tolerance
- ±0.01
- ±0.015
Clear
D/P (Shaft diameter)(mm)
[1-5.99/0.01mm Unit(s)]
Clear
Step (Step shape of the first step)
- 1A
- 1B
- 1C
- 1D
- 1E
Clear
No. (Nominal diameter)(mm)
1.5

2

2.5

3

3.5

4

4.5

5

5.5

6
Clear
RE (R shape alteration・enlargement)(mm)
[0.5-2/0.5mm Unit(s)]
Clear
A (Step shape diameter)(mm)
[0.6-5.99/0.01mm Unit(s)]
Clear
C (Step type taper width)(mm)
0.1

0.2
[0.1-2.2/0.1mm Unit(s)]
Clear
CVC (Designation of C dimension in increments of 0.01mm)(mm)
[0.05-1/0.01mm Unit(s)]
Clear
F (Bearing bore length)(mm)
[10-119/0.01mm Unit(s)]
Clear
G (Tip C chamfering width)(mm)
Clear
K (Tip angle)(°)
Clear
L (L dimension)(mm)
[12-120/0.01mm Unit(s)]
Clear
Q (Tip R chamfering)(mm)
[0.2-2.9/0.1mm Unit(s)]
Clear
R (Step type R)(mm)
0.2
[0.2-2.2/0.1mm Unit(s)]
Clear
S (Tip tapered width)(mm)
Clear
V (Tip diameter)(mm)
[1-5.99/0.01mm Unit(s)]
Clear
VC (V dimension alteration, smaller than V min)(mm)
[0.6-1.99/0.01mm Unit(s)]
Clear
type
- L-CPDB-1A
- L-CPDB-1AB
- L-CPDB-1AC
- L-CPDB-1AG
- L-CPDB-1AR
- L-CPDB-1AT
- L-CPDB-1B
- L-CPDB-1BB
- L-CPDB-1BC
- L-CPDB-1BG
- L-CPDB-1BR
- L-CPDB-1BT
- L-CPDB-1C
- L-CPDB-1CB
- L-CPDB-1CC
- L-CPDB-1CG
- L-CPDB-1CR
- L-CPDB-1CT
- L-CPDB-1D
- L-CPDB-1DB
- L-CPDB-1DC
- L-CPDB-1DG
- L-CPDB-1DR
- L-CPDB-1DT
- L-CPDB-1E
- L-CPDB-1EB
- L-CPDB-1EC
- L-CPDB-1EG
- L-CPDB-1ER
- L-CPDB-1ET
- L-CPHB-1A
- L-CPHB-1AB
- L-CPHB-1AC
- L-CPHB-1AG
- L-CPHB-1AR
- L-CPHB-1AT
- L-CPHB-1B
- L-CPHB-1BB
- L-CPHB-1BC
- L-CPHB-1BG
- L-CPHB-1BR
- L-CPHB-1BT
- L-CPHB-1C
- L-CPHB-1CB
- L-CPHB-1CC
- L-CPHB-1CG
- L-CPHB-1CR
- L-CPHB-1CT
- L-CPHB-1D
- L-CPHB-1DB
- L-CPHB-1DC
- L-CPHB-1DG
- L-CPHB-1DR
- L-CPHB-1DT
- L-CPHB-1E
- L-CPHB-1EB
- L-CPHB-1EC
- L-CPHB-1EG
- L-CPHB-1ER
- L-CPHB-1ET
Clear
Shape (Tip shape)
- No processing
- C
- G
- T
- R
- B
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

8 Day(s) or Less
Clear

Specify Alterations

One-Step Core Pins -Tip Lapped・Shaft Diameter (P) Designation Type- (Part Number)

Name: One-Step Core Pins -Tip Lapped・Shaft Diameter (P) Designation Type-
Brand: MISUMI

Click this image to zoom it.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

L-CPHB-1DR5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-VC[1-1.49/0.01]-C[0.1-2.2/0.1]-Q[0.2-2.7/0.1]

L-CPHB-1DR5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-VC[1-1.49/0.01]-CVC[0.05-1/0.01]-Q[0.2-2.7/0.1]

L-CPHB-1DR6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-V[2-5.99/0.01]-C[0.1-2.2/0.1]-Q[0.2-2.9/0.1]

L-CPHB-1DR6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-V[2-5.99/0.01]-CVC[0.05-1/0.01]-Q[0.2-2.9/0.1]

L-CPHB-1DR6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-VC[1.5-1.99/0.01]-C[0.1-2.2/0.1]-Q[0.2-2.9/0.1]

L-CPHB-1DR6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-VC[1.5-1.99/0.01]-CVC[0.05-1/0.01]-Q[0.2-2.9/0.1]

L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-V[1-1.48/0.01]-R0.2-Q[0.2-1.4/0.1]

L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-V[1-1.48/0.01]-R[0.2-0.4/0.1]-Q[0.2-1.4/0.1]

L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-V[1-1.48/0.01]-RE[0.5-2/0.5]-Q[0.2-1.4/0.1]

L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-VC[0.6-0.99/0.01]-R0.2-Q[0.2-1.4/0.1]

L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-VC[0.6-0.99/0.01]-R[0.2-0.4/0.1]-Q[0.2-1.4/0.1]

L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-VC[0.6-0.99/0.01]-RE[0.5-2/0.5]-Q[0.2-1.4/0.1]

L-CPHB-1ER2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-99/0.01]-A[1-1.98/0.01]-V[1-1.98/0.01]-R[0.2-0.4/0.1]-Q[0.2-1.9/0.1]

L-CPHB-1ER2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-99/0.01]-A[1-1.98/0.01]-V[1-1.98/0.01]-RE[0.5-2/0.5]-Q[0.2-1.9/0.1]

L-CPHB-1ER2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-99/0.01]-A[1-2.48/0.01]-V[1-2.48/0.01]-R[0.2-0.7/0.1]-Q[0.2-1.2/0.1]

L-CPHB-1ER2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-99/0.01]-A[1-2.48/0.01]-V[1-2.48/0.01]-RE[0.5-2/0.5]-Q[0.2-1.2/0.1]

L-CPHB-1ER3-[12-100/0.01]-P[2.5-2.99/0.01]-F[10-99/0.01]-A[1-2.98/0.01]-V[1-2.98/0.01]-R[0.2-0.9/0.1]-Q[0.2-1.4/0.1]

L-CPHB-1ER3-[12-100/0.01]-P[2.5-2.99/0.01]-F[10-99/0.01]-A[1-2.98/0.01]-V[1-2.98/0.01]-RE[0.5-2/0.5]-Q[0.2-1.4/0.1]

L-CPHB-1ER3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119/0.01]-A[0.7-3.49/0.01]-V[1-3.49/0.01]-R[0.2-1.3/0.1]-Q[0.2-1.7/0.1]

L-CPHB-1ER3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119/0.01]-A[0.7-3.49/0.01]-V[1-3.49/0.01]-RE[0.5-2/0.5]-Q[0.2-1.7/0.1]

L-CPHB-1DR5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-VC[1-1.49/0.01]-C[0.1-2.2/0.1]-Q[0.2-2.7/0.1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

This is a single-stage core pin with a lapped tip and specified shaft diameter (P).

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
L-CPHB-1DR5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-VC[1-1.49/0.01]-C[0.1-2.2/0.1]-Q[0.2-2.7/0.1]
L-CPHB-1DR5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-VC[1-1.49/0.01]-CVC[0.05-1/0.01]-Q[0.2-2.7/0.1]
L-CPHB-1DR6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-V[2-5.99/0.01]-C[0.1-2.2/0.1]-Q[0.2-2.9/0.1]
L-CPHB-1DR6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-V[2-5.99/0.01]-CVC[0.05-1/0.01]-Q[0.2-2.9/0.1]
L-CPHB-1DR6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-VC[1.5-1.99/0.01]-C[0.1-2.2/0.1]-Q[0.2-2.9/0.1]
L-CPHB-1DR6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-VC[1.5-1.99/0.01]-CVC[0.05-1/0.01]-Q[0.2-2.9/0.1]
L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-V[1-1.48/0.01]-R0.2-Q[0.2-1.4/0.1]
L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-V[1-1.48/0.01]-R[0.2-0.4/0.1]-Q[0.2-1.4/0.1]
L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-V[1-1.48/0.01]-RE[0.5-2/0.5]-Q[0.2-1.4/0.1]
L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-VC[0.6-0.99/0.01]-R0.2-Q[0.2-1.4/0.1]
L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-VC[0.6-0.99/0.01]-R[0.2-0.4/0.1]-Q[0.2-1.4/0.1]
L-CPHB-1ER1.5-[12-100/0.01]-P[1-1.49/0.01]-F[10-99/0.01]-A[0.6-1.48/0.01]-VC[0.6-0.99/0.01]-RE[0.5-2/0.5]-Q[0.2-1.4/0.1]
L-CPHB-1ER2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-99/0.01]-A[1-1.98/0.01]-V[1-1.98/0.01]-R[0.2-0.4/0.1]-Q[0.2-1.9/0.1]
L-CPHB-1ER2-[12-100/0.01]-P[1.5-1.99/0.01]-F[10-99/0.01]-A[1-1.98/0.01]-V[1-1.98/0.01]-RE[0.5-2/0.5]-Q[0.2-1.9/0.1]
L-CPHB-1ER2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-99/0.01]-A[1-2.48/0.01]-V[1-2.48/0.01]-R[0.2-0.7/0.1]-Q[0.2-1.2/0.1]
L-CPHB-1ER2.5-[12-100/0.01]-P[2-2.49/0.01]-F[10-99/0.01]-A[1-2.48/0.01]-V[1-2.48/0.01]-RE[0.5-2/0.5]-Q[0.2-1.2/0.1]
L-CPHB-1ER3-[12-100/0.01]-P[2.5-2.99/0.01]-F[10-99/0.01]-A[1-2.98/0.01]-V[1-2.98/0.01]-R[0.2-0.9/0.1]-Q[0.2-1.4/0.1]
L-CPHB-1ER3-[12-100/0.01]-P[2.5-2.99/0.01]-F[10-99/0.01]-A[1-2.98/0.01]-V[1-2.98/0.01]-RE[0.5-2/0.5]-Q[0.2-1.4/0.1]
L-CPHB-1ER3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119/0.01]-A[0.7-3.49/0.01]-V[1-3.49/0.01]-R[0.2-1.3/0.1]-Q[0.2-1.7/0.1]
L-CPHB-1ER3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119/0.01]-A[0.7-3.49/0.01]-V[1-3.49/0.01]-RE[0.5-2/0.5]-Q[0.2-1.7/0.1]
L-CPHB-1ER3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119/0.01]-A[0.7-3.49/0.01]-VC[0.7-0.99/0.01]-R[0.2-1.3/0.1]-Q[0.2-1.7/0.1]
L-CPHB-1ER3.5-[12-120/0.01]-P[3-3.49/0.01]-F[10-119/0.01]-A[0.7-3.49/0.01]-VC[0.7-0.99/0.01]-RE[0.5-2/0.5]-Q[0.2-1.7/0.1]
L-CPHB-1ER4-[12-120/0.01]-P[3.5-3.99/0.01]-F[10-119/0.01]-A[0.7-3.98/0.01]-V[1-3.98/0.01]-R[0.2-1.6/0.1]-Q[0.2-1.9/0.1]
L-CPHB-1ER4-[12-120/0.01]-P[3.5-3.99/0.01]-F[10-119/0.01]-A[0.7-3.98/0.01]-V[1-3.98/0.01]-RE[0.5-2/0.5]-Q[0.2-1.9/0.1]
L-CPHB-1ER4-[12-120/0.01]-P[3.5-3.99/0.01]-F[10-119/0.01]-A[0.7-3.98/0.01]-VC[0.7-0.99/0.01]-R[0.2-1.6/0.1]-Q[0.2-1.9/0.1]
L-CPHB-1ER4-[12-120/0.01]-P[3.5-3.99/0.01]-F[10-119/0.01]-A[0.7-3.98/0.01]-VC[0.7-0.99/0.01]-RE[0.5-2/0.5]-Q[0.2-1.9/0.1]
L-CPHB-1ER4.5-[12-120/0.01]-P[4-4.49/0.01]-F[10-119/0.01]-A[1-4.48/0.01]-V[1-4.48/0.01]-R[0.2-1.7/0.1]-Q[0.2-2.2/0.1]
L-CPHB-1ER4.5-[12-120/0.01]-P[4-4.49/0.01]-F[10-119/0.01]-A[1-4.48/0.01]-V[1-4.48/0.01]-RE[0.5-2/0.5]-Q[0.2-2.2/0.1]
L-CPHB-1ER5-[12-120/0.01]-P[4.5-4.99/0.01]-F[10-119/0.01]-A[1-4.98/0.01]-V[1-4.98/0.01]-R[0.2-1.9/0.1]-Q[0.2-2.4/0.1]
L-CPHB-1ER5-[12-120/0.01]-P[4.5-4.99/0.01]-F[10-119/0.01]-A[1-4.98/0.01]-V[1-4.98/0.01]-RE[0.5-2/0.5]-Q[0.2-2.4/0.1]
L-CPHB-1ER5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-V[1.5-5.48/0.01]-R[0.2-2.2/0.1]-Q[0.2-2.7/0.1]
L-CPHB-1ER5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-V[1.5-5.48/0.01]-RE[0.5-2/0.5]-Q[0.2-2.7/0.1]
L-CPHB-1ER5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-VC[1-1.49/0.01]-R[0.2-2.2/0.1]-Q[0.2-2.7/0.1]
L-CPHB-1ER5.5-[12-120/0.01]-P[5-5.49/0.01]-F[10-119/0.01]-A[1-5.48/0.01]-VC[1-1.49/0.01]-RE[0.5-2/0.5]-Q[0.2-2.7/0.1]
L-CPHB-1ER6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-V[2-5.99/0.01]-R[0.2-2.2/0.1]-Q[0.2-2.9/0.1]
L-CPHB-1ER6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-V[2-5.99/0.01]-RE[0.5-2/0.5]-Q[0.2-2.9/0.1]
L-CPHB-1ER6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-VC[1.5-1.99/0.01]-R[0.2-2.2/0.1]-Q[0.2-2.9/0.1]
L-CPHB-1ER6-[12-120/0.01]-P[5.5-5.99/0.01]-F[10-119/0.01]-A[1.5-5.99/0.01]-VC[1.5-1.99/0.01]-RE[0.5-2/0.5]-Q[0.2-2.9/0.1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Shaft diameter tolerance	L dimension tolerance	Tip gradient tolerance	D/P (Shaft diameter) (mm)	Step (Step shape of the first step)	Shape (Tip shape)	No. (Nominal diameter) (mm)	RE (R shape alteration・enlargement) (mm)	A (Step shape diameter) (mm)	C (Step type taper width) (mm)	CVC (Designation of C dimension in increments of 0.01mm) (mm)	F (Bearing bore length) (mm)	G (Tip C chamfering width) (mm)	K (Tip angle) (°)	L (L dimension) (mm)	Q (Tip R chamfering) (mm)	R (Step type R) (mm)	S (Tip tapered width) (mm)	V (Tip diameter) (mm)	VC (V dimension alteration, smaller than V min) (mm)
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5 ～ 5.49	1D	R	5.5	-	1 ～ 5.48	0.1 ～ 2.2	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.7	-	-	-	1 ～ 1.49
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5 ～ 5.49	1D	R	5.5	-	1 ～ 5.48	-	0.05 ～ 1	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.7	-	-	-	1 ～ 1.49
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5.5 ～ 5.99	1D	R	6	-	1.5 ～ 5.99	0.1 ～ 2.2	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.9	-	-	2 ～ 5.99	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5.5 ～ 5.99	1D	R	6	-	1.5 ～ 5.99	-	0.05 ～ 1	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.9	-	-	2 ～ 5.99	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5.5 ～ 5.99	1D	R	6	-	1.5 ～ 5.99	0.1 ～ 2.2	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.9	-	-	-	1.5 ～ 1.99
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5.5 ～ 5.99	1D	R	6	-	1.5 ～ 5.99	-	0.05 ～ 1	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.9	-	-	-	1.5 ～ 1.99
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	1 ～ 1.49	1E	R	1.5	-	0.6 ～ 1.48	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.4	0.2	-	1 ～ 1.48	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	1 ～ 1.49	1E	R	1.5	-	0.6 ～ 1.48	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.4	0.2 ～ 0.4	-	1 ～ 1.48	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	1 ～ 1.49	1E	R	1.5	0.5 ～ 2	0.6 ～ 1.48	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.4	-	-	1 ～ 1.48	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	1 ～ 1.49	1E	R	1.5	-	0.6 ～ 1.48	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.4	0.2	-	-	0.6 ～ 0.99
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	1 ～ 1.49	1E	R	1.5	-	0.6 ～ 1.48	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.4	0.2 ～ 0.4	-	-	0.6 ～ 0.99
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	1 ～ 1.49	1E	R	1.5	0.5 ～ 2	0.6 ～ 1.48	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.4	-	-	-	0.6 ～ 0.99
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	1.5 ～ 1.99	1E	R	2	-	1 ～ 1.98	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.9	0.2 ～ 0.4	-	1 ～ 1.98	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	1.5 ～ 1.99	1E	R	2	0.5 ～ 2	1 ～ 1.98	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.9	-	-	1 ～ 1.98	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	2 ～ 2.49	1E	R	2.5	-	1 ～ 2.48	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.2	0.2 ～ 0.7	-	1 ～ 2.48	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	2 ～ 2.49	1E	R	2.5	0.5 ～ 2	1 ～ 2.48	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.2	-	-	1 ～ 2.48	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	2.5 ～ 2.99	1E	R	3	-	1 ～ 2.98	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.4	0.2 ～ 0.9	-	1 ～ 2.98	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	2.5 ～ 2.99	1E	R	3	0.5 ～ 2	1 ～ 2.98	-	-	10 ～ 99	-	-	12 ～ 100	0.2 ～ 1.4	-	-	1 ～ 2.98	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	3 ～ 3.49	1E	R	3.5	-	0.7 ～ 3.49	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.7	0.2 ～ 1.3	-	1 ～ 3.49	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	3 ～ 3.49	1E	R	3.5	0.5 ～ 2	0.7 ～ 3.49	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.7	-	-	1 ～ 3.49	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	3 ～ 3.49	1E	R	3.5	-	0.7 ～ 3.49	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.7	0.2 ～ 1.3	-	-	0.7 ～ 0.99
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	3 ～ 3.49	1E	R	3.5	0.5 ～ 2	0.7 ～ 3.49	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.7	-	-	-	0.7 ～ 0.99
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	3.5 ～ 3.99	1E	R	4	-	0.7 ～ 3.98	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.9	0.2 ～ 1.6	-	1 ～ 3.98	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	3.5 ～ 3.99	1E	R	4	0.5 ～ 2	0.7 ～ 3.98	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.9	-	-	1 ～ 3.98	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	3.5 ～ 3.99	1E	R	4	-	0.7 ～ 3.98	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.9	0.2 ～ 1.6	-	-	0.7 ～ 0.99
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	3.5 ～ 3.99	1E	R	4	0.5 ～ 2	0.7 ～ 3.98	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 1.9	-	-	-	0.7 ～ 0.99
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	4 ～ 4.49	1E	R	4.5	-	1 ～ 4.48	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.2	0.2 ～ 1.7	-	1 ～ 4.48	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	4 ～ 4.49	1E	R	4.5	0.5 ～ 2	1 ～ 4.48	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.2	-	-	1 ～ 4.48	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	4.5 ～ 4.99	1E	R	5	-	1 ～ 4.98	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.4	0.2 ～ 1.9	-	1 ～ 4.98	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	4.5 ～ 4.99	1E	R	5	0.5 ～ 2	1 ～ 4.98	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.4	-	-	1 ～ 4.98	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5 ～ 5.49	1E	R	5.5	-	1 ～ 5.48	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.7	0.2 ～ 2.2	-	1.5 ～ 5.48	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5 ～ 5.49	1E	R	5.5	0.5 ～ 2	1 ～ 5.48	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.7	-	-	1.5 ～ 5.48	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5 ～ 5.49	1E	R	5.5	-	1 ～ 5.48	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.7	0.2 ～ 2.2	-	-	1 ～ 1.49
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5 ～ 5.49	1E	R	5.5	0.5 ～ 2	1 ～ 5.48	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.7	-	-	-	1 ～ 1.49
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5.5 ～ 5.99	1E	R	6	-	1.5 ～ 5.99	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.9	0.2 ～ 2.2	-	2 ～ 5.99	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5.5 ～ 5.99	1E	R	6	0.5 ～ 2	1.5 ～ 5.99	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.9	-	-	2 ～ 5.99	-
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5.5 ～ 5.99	1E	R	6	-	1.5 ～ 5.99	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.9	0.2 ～ 2.2	-	-	1.5 ～ 1.99
-	1 Piece(s)	8 Day(s) or more	10	SKH51	0/-0.005	+0.02/0	±0.01	5.5 ～ 5.99	1E	R	6	0.5 ～ 2	1.5 ～ 5.99	-	-	10 ～ 119	-	-	12 ～ 120	0.2 ～ 2.9	-	-	-	1.5 ～ 1.99

Product TOP

Basic Information

Shape type	One-step	Surface treatment	Tip lapped	Head thickness	4mm(T4)
Step (Step shape of the second step)	No second step

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand

Search by Category

How can we improve?

Configure

Specification/Dimensions

Material

Shaft diameter tolerance

L dimension tolerance

Tip gradient tolerance

D/P (Shaft diameter)(mm)

Step (Step shape of the first step)

No. (Nominal diameter)(mm)

RE (R shape alteration・enlargement)(mm)

A (Step shape diameter)(mm)

C (Step type taper width)(mm)

CVC (Designation of C dimension in increments of 0.01mm)(mm)

F (Bearing bore length)(mm)

G (Tip C chamfering width)(mm)

K (Tip angle)(°)

L (L dimension)(mm)

Q (Tip R chamfering)(mm)

R (Step type R)(mm)

S (Tip tapered width)(mm)

V (Tip diameter)(mm)

VC (V dimension alteration, smaller than V min)(mm)

type

Shape (Tip shape)

CAD

Days to Ship

Specify Alterations

One-Step Core Pins -Tip Lapped・Shaft Diameter (P) Designation Type- (Part Number)

Copy Part Number URL to Clipboard

Product Description

Part Number

Basic Information

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで