• We regret to inform that dispatch lead time for MISUMI India non-stock parts(from Japan) will be increased by 1 day from 1st Apr, 2019 because of some operational constraints at Japan Narita Airport.

Stepped Ejector Pins -Stainless SUS440C/Tip Diameter・L Dimension Designation Type-

Stepped Ejector Pins -Stainless SUS440C/Tip Diameter・L Dimension Designation Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
EWSF1.5-[40-200/0.01]-P[0.6-1.4/0.01]-N[15-150/1]
EWSF2-[40-200/0.01]-P[0.8-1.9/0.01]-N[15-150/1]
EWSF2.5-[40-200/0.01]-P[0.8-2.4/0.01]-N[15-150/1]
EWSF3-[40-200/0.01]-P[1-2.9/0.01]-N[15-150/1]
EWSF3.5-[40-200/0.01]-P[1.5-3.4/0.01]-N[15-150/1]
EWSF4-[40-200/0.01]-P[1.5-3.9/0.01]-N[15-150/1]
EWSF4.5-[40-200/0.01]-P[2.5-4.4/0.01]-N[15-150/1]
EWSF5-[40-200/0.01]-P[3-4.9/0.01]-N[15-150/1]
EWSF5.5-[40-200/0.01]-P[3.5-5.4/0.01]-N[15-150/1]
EWSF6-[40-200/0.01]-P[4-5.9/0.01]-N[15-150/1]
EWSJF4-[50-200/0.01]-P[1.5-3.9/0.01]-N[30-150/1]
EWSJF4.5-[50-200/0.01]-P[2.5-4.4/0.01]-N[30-150/1]
EWSJF5-[50-200/0.01]-P[3-4.9/0.01]-N[30-150/1]
EWSJF5.5-[50-200/0.01]-P[3.5-5.4/0.01]-N[30-150/1]
EWSJF6-[50-200/0.01]-P[4-5.9/0.01]-N[30-150/1]
Part NumberVolume DiscountDays to ShipRoHSHead thickness D (Shaft diameter)
(mm)
P (Tip diameter)
(mm)
L (L dimension)
(mm)
N
(mm)
8 Day(s) or more 104mm(T4)1.50.6 ~ 1.440 ~ 20015 ~ 150
8 Day(s) or more 104mm(T4)20.8 ~ 1.940 ~ 20015 ~ 150
8 Day(s) or more 104mm(T4)2.50.8 ~ 2.440 ~ 20015 ~ 150
8 Day(s) or more 104mm(T4)31 ~ 2.940 ~ 20015 ~ 150
8 Day(s) or more 104mm(T4)3.51.5 ~ 3.440 ~ 20015 ~ 150
8 Day(s) or more 104mm(T4)41.5 ~ 3.940 ~ 20015 ~ 150
8 Day(s) or more 104mm(T4)4.52.5 ~ 4.440 ~ 20015 ~ 150
8 Day(s) or more 104mm(T4)53 ~ 4.940 ~ 20015 ~ 150
8 Day(s) or more 104mm(T4)5.53.5 ~ 5.440 ~ 20015 ~ 150
8 Day(s) or more 104mm(T4)64 ~ 5.940 ~ 20015 ~ 150
8 Day(s) or more 106mm(JIS)41.5 ~ 3.950 ~ 20030 ~ 150
8 Day(s) or more 106mm(JIS)4.52.5 ~ 4.450 ~ 20030 ~ 150
8 Day(s) or more 106mm(JIS)53 ~ 4.950 ~ 20030 ~ 150
8 Day(s) or more 106mm(JIS)5.53.5 ~ 5.450 ~ 20030 ~ 150
8 Day(s) or more 106mm(JIS)64 ~ 5.950 ~ 20030 ~ 150

Loading...

  1. 1

Basic Information

Material SUS440C Tip diameter tolerance (Reference tolerance) 0/-0.005 Shaft diameter tolerance (Reference tolerance) 0/-0.02
Surface treatment No Tip shape No Character engraving type No
Number of engraving characters No Gas release shape No

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Mold
TEL:124- 468-8824 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)