Punch for Punching Thick Plates - Brim Thickness 12mm -
Brand :
MISUMI
Caution
Product Description
It is a punch with a thicker head thickness than the existing thick plate punch (head thickness 8 mm) and increased brim strength. Standard Flange Thickness: 12 mm. The flange thickness/diameter can be changed by alteration.
Drawing / Product specification
Even select HC alteration, under the head is R1.7~2.0.
| Shank Diameter DTolerance | Material Hardness | Catalog No. | ||
|---|---|---|---|---|
| Type | Tip Shape | B Tip Length | ||
| Dm5 | Equivalent to SKH51 61～64HRC | HSAP |
|
Tip Length（B） L＞S |
Specification table
| Catalog No. | L | 0.01 mm increments | B | H | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
| ||||||||||||||||
| Type | Tip shape | B Tip length | D | |||||||||||||||
| min. P max. | P・Kmax. | P・Wmin. | R | |||||||||||||||
| （Dm5） HSAP |
|
| 10 | （50） | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 3.00～9.99 | 9.97 | 2.50 |
| 13 | 18 |
| 13 | （50） | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 6.00～12.99 | 12.97 | 3.00 | 21 | |||||
| 16 | （50） | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 10.00～15.99 | 15.97 | 4.00 | 19 | 24 | ||||
| 20 | （50） | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 13.00～19.99 | 19.97 | 5.00 | 28 | |||||
| 25 | （50） | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 18.00～24.99 | 24.97 | 6.00 | 33 | |||||
| 10 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 3.00～9.99 | 9.97 | 2.50 | 19 | 18 | ||||
| 13 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 6.00～12.99 | 12.97 | 3.00 | 21 | ||||||
| 16 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 10.00～15.99 | 15.97 | 4.00 | 25 | 24 | ||||||
| 20 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 13.00～19.99 | 19.97 | 5.00 | 28 | |||||||
| 25 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 18.00～24.99 | 24.97 | 6.00 | 33 | |||||||
：P＞D-0.03 ℓ＝0 When the tip shape is P＞D-0.03, D -0.01/-0.03 (inlet) is not provided.
：P・K＞D-0.05ℓ＝0 When P·K > D -0.05 is set for the tip shape , D -0.01/-0.03 (inlet) is not provided.
L(50)B＝8 When the total length is (50), the tip length is uniformly 8 mm.
Order
Alterations
