Punch with Positioning Dowel Hole - RX Coating (Al-Cr Coating + Nitriding Treatment) -

Brand :

MISUMI

Caution

Product Description

For complete product overview and details on Punches with Locating Dowel Holes －RX Coating－ see the sections below:

Drawing / Product specification

位置決めノック穴付パンチ－RXコーティング（Al-Cr系コーティング＋窒化処理）－

The tip edges are slightly rounded.
Accessories MS6-25

Shank diameter D Tolerance	Material Hardness	Catalog No.
Shank diameter D Tolerance	Material Hardness	Type	Tip shape	B Tip length	With dowel hole
D_m5	Equivalent to SKD11 60～63HRC Surface 3100HV	RX-SP		Tip length（B） X＞L＞S	-C

Specification table

Catalog No.					L												0.01 mm Increments				B	H
Type	Tip shape	B Tip length	With dowel hole	D
Type	Tip shape	B Tip length	With dowel hole	D													min. P max.	P・Kmax.	P・Wmin.	R
RX-SP			-C	10	（40）	50	60	70	80	90	100	110	120	130	140	150	3.00～9.99	9.97	2.50		13	13
				13	（40）	50	60	70	80	90	100	110	120	130	140	150	6.00～12.99	12.97	3.00		13	16
				16	（40）	50	60	70	80	90	100	110	120	130	140	150	10.00～15.99	15.97	4.00		19	19
				20	（40）	50	60	70	80	90	100	110	120	130	140	150	13.00～19.99	19.97	5.00			23
				25	（40）	50	60	70	80	90	100	110	120	130	140	150	18.00～24.99	24.97	6.00			28
				32	（40）	（50）	60	70	80	90	100	110	120	130	140	150	20.00～31.99	31.97	7.00			35
				38	（40）	（50）	60	70	80	90	100	110	120	130	140	150	28.00～37.99	37.97	8.00			41
				45	（40）	（50）	60	70	80	90	100	110	120	130	140	150	35.00～44.99	44.97	9.00			48
				10		50	60	70	80	90	100	110	120	130	140	150	3.00～9.99	9.97	2.50		19	13
				13		50	60	70	80	90	100	110	120	130	140	150	6.00～12.99	12.97	3.00		19	16
				16			60	70	80	90	100	110	120	130	140	150	10.00～15.99	15.97	4.00		25	19
				20			60	70	80	90	100	110	120	130	140	150	13.00～19.99	19.97	5.00			23
				25			60	70	80	90	100	110	120	130	140	150	18.00～24.99	24.97	6.00			28
				32			60	70	80	90	100	110	120	130	140	150	20.00～31.99	31.97	7.00			35
				38			60	70	80	90	100	110	120	130	140	150	28.00～37.99	37.97	8.00			41
				45			60	70	80	90	100	110	120	130	140	150	35.00～44.99	44.97	9.00			48
				10				70	80	90	100	110	120	130	140	150	6.00～9.99	9.97	5.00		30	13
				13				70	80	90	100	110	120	130	140	150	6.00～12.99	12.97	5.00		30	16
				16					80	90	100	110	120	130	140	150	10.00～15.99	-		-	40	19
				20					80	90	100	110	120	130	140	150	13.00～19.99					23
				25					80	90	100	110	120	130	140	150	18.00～24.99					28
				32					80	90	100	110	120	130	140	150	20.00～31.99					35
				38					80	90	100	110	120	130	140	150	28.00～37.99					41
				45					80	90	100	110	120	130	140	150	35.00～44.99					48

：P＞D-0.03ℓ＝0	If P > D-0.03 for tip shape, D -0.01/-0.03 (press-in lead) is not included.
：P・K＞D-0.05ℓ＝0	If P ⋅ K > D-0.05 for tip shape, D -0.01/-0.03 (press-in lead) is not included.
L（40）：D10 ～ 25 B＝8 If full length is (40) and D dimension is 10～25, tip length is 8 mm in all cases
D32 ～ 45 B＝6 If full length is (40) and D dimension is 32～45, tip length is 6 mm in all cases
L（50）B＝13 If full length is (50), tip length is 13 mm in all cases.

Order

Alterations

Related information

使用例
■ Uses of punches with locating dowel holes
This type of punch is mainly used with dies for parts such as automobile bodies, in combination with a retainer that holds the punch. Rather than indirect positioning using the retainer dowel hole, these punches can be positioned directly using the dowel hole machined on the punch axis, improving die accuracy. These punches are particularly effective when used for die machining with NC machines. This type of punch can be also used with dies for the external panels of electrical appliances, either in combination with a retainer, or attached to the punch plate of an ordinary progressive die.

位置決めノック穴付パンチ -RWコーティング（Al-Cr系コーティング+WPC®処理）-