Economy Slide Rails

MISUMI's economical slide rails are formed using high-quality press molds, ensuring excellent precision in finished product assembly. Even after 50,000 reciprocating movements, smooth sliding is possible without deformation in appearance for normal use.

Test conditions: Samples are precisely mounted on durability testing equipment, with a 24.5KG load applied to the drawer, performing continuous push-pull reciprocating motion at 12 cycles per minute.

Changes in the sample are observed and the product condition is recorded when reaching the specified number of cycles.

	Number of cycles	Noise	Sliding resistance	Deflection amount at full extension
	10000	None	0.8kg	1mm
	※20000	None	0.8kg	1mm
	30000	None	0.7kg	1mm
	40000	None	0.7kg	1.2mm
	50000	None	0.7kg	1.2mm

* At 1 opening/closing every 10 minutes, 20,000 cycles equals approximately 1 year of use

MISUMI's Economy Series slide rails do not rust even after 24 hours of salt spray testing and have excellent rust resistance.

	Test time (H)	Market distribution products*	MISUMI Economy Series
	24	Black spot occurrence in 1 location	Normal
	48	10% black spot occurrence on internal rail	2% black spot occurrence on internal rail
	72	Large area of rust on outer rail	3% black spot occurrence on external rail
	96	Large area inside the slide rail Red rust occurred, rust also on balls	Black spot occurrence inside slide rail Rust on balls

* Market distribution products are similar products purchased randomly by our company in online and offline markets.

Installation Direction Examples

*It is recommended not to use in cases where moment load is received.

Slide rail when ball creep occurs