• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter Locating Pin - Straight / Small Head

  MISUMI

  - Small Diameter Locating Pin - Straight / Small Head from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
  - The material of locating pin can be selected 5 types, Steel SKD61, Steel SK95(SK4), Stainless Steel SUS304, Stainless Steel SUS304 Equivalent, Stainless Steel SUS440C or 13Cr.
  - The outer diameter of the locating pin can be configurable up to 3 mm.
  - SUS304 may not be polished.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Locating Pins - Small Head, Round Tapered - Press Fit

  MISUMI

  - Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)

  MISUMI

  [Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a male thread.

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  - When the P dimension is small, a centering hole will cause the sphere section to become small.
  

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter Locating Pin - Shouldered, Threaded

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Threaded from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - The material of pin can be selected 2 types, SK95 (SK4) Equivalent and SUS304.
  - The hardness of steel pin is 50～58HRC.
  - SUS304 may not be polished.
  - When L=0, an undercut will be added at the neck of the thread.
  - Shaft diameter can be selected up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter Locating Pin - Small Head / Press Fit

  MISUMI

  - Small Diameter Locating Pin - Small Head / Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - Material code SG and DG are applicable to L configurable type of sphere only.
  - L selectable type is applicable to spherical tip type only.
  - SUS304 may not be polished.
  - Chamfering of mounting portion and change of tolerance are available as alterations.
  - Shaft diameter can be configured up to 3 mm.
  

  CAD ：

  2D / 3D

  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Locating Pins - Small Head, Round Tapered - Threaded

  MISUMI

  Large Head, Tapered, with the configurable dimension for each part. The tolerances on both ends and the tapered dimensions are also configurable.

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Threaded from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)

  MISUMI

  - Locating Pins - Shouldered-Taper Angle (D, P Tolerance Selectable-Press Fit) from MISUMI.
  - Shouldered with each dimension configurable.
  - Pin’s mounting method can be selected 3 types, Thread, Tapped or Press fit.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - SUS304 may not be polished and may have no centering hole.
  

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter Locating Pin - Shouldered, Press Fit

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
  - The material of locating pin can be selected 2 types, Steel SK95(SK4) Equivalent, Stainless Steel SUS304.
  - SUS304 may not be polished.
  - The hardness level of SK95 (SK4) Equivalent is 50～58HRC.
  - The outer diameter of the locating pin can be selectable up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)

  MISUMI

  Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Height Adjusting Pins - Press Fit

  MISUMI

  - Height Adjusting Pins - Press Fit from MISUMI.
  - Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Hard Chrome Plating products are not available in Precision Grade Tolerance.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Locating Pins - Press Fit

  MISUMI

  - Locating Pins - Press Fit from MISUMI.
  - Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).
  

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Locating Pins - Air Vent, Threaded

  MISUMI

  Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)

  MISUMI

  Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Basic Shape
Insertion Guide Tip Shape
Insertion Guide Tip Type
Insertion Guide Specifications
Mounting Side Shape
Surface Treatment
Heat Treatment
Material
Insertion Guide Outer Dia. D1(mm)
Insertion Guide Tolerance
Mounting Side Outer Dia. d(Ø)
Mounting Side Tolerance

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Small Diameter Locating Pin - Straight / Small Head	Locating Pins - Small Head, Round Tapered - Press Fit	Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)	Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit	Small Diameter Locating Pin - Shouldered, Threaded	Small Diameter Locating Pin - Small Head / Press Fit	Locating Pins - Small Head, Round Tapered - Threaded	Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded	Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)	Small Diameter Locating Pin - Shouldered, Press Fit	Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)	Height Adjusting Pins - Press Fit	Locating Pins - Press Fit	Locating Pins - Air Vent, Threaded	Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
From
Days to Ship	7 Day(s) or more	6 Day(s) or more	6 Day(s)	6 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s)	6 Day(s) or more	6 Day(s)	8 Day(s) or more	6 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s)	6 Day(s) or more
Basic Shape	Straight / Air Vent	Large Head	Shouldered	Large Head	Shouldered	Small Head	Large Head	Large Head	Shouldered	Shouldered	Small Head	Small Head	Large Head	Large Head	Small Head
Insertion Guide Tip Shape	Round	Round / Diamond	Round	Round / Diamond	Round	Round	Round / Diamond	Round / Diamond	Round	Round	Round	Round / Diamond	Round	Round	Round / Diamond
Insertion Guide Tip Type	Tapered / Taper R / Spherical / Flat	Tapered	Tapered	Spherical	Taper R / Spherical / Flat	Tapered / Taper R / Spherical / Flat	Tapered	Spherical	Tapered	Tapered / Taper R / Spherical / Flat	Flat	Tapered	Flat	Flat	Spherical
Insertion Guide Specifications	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Mounting Side Shape	Straight (Press-Fit)	Straight (Press-Fit)	Threaded	Straight (Press-Fit)	Threaded	Straight (Press-Fit)	Threaded	Threaded	Straight (Press-Fit)	Straight (Press-Fit)	Straight (Press-Fit)	Straight (Press-Fit)	Straight (Press-Fit)	Threaded	Straight (Press-Fit)
Surface Treatment	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Heat Treatment	Not Provided / Directly Quenching	Not Provided / Directly Quenching	Not Provided / Directly Quenching	Not Provided / Directly Quenching	Not Provided / Directly Quenching	Not Provided / Directly Quenching	Not Provided / Directly Quenching	Not Provided / Directly Quenching	Not Provided / Directly Quenching	Not Provided	Not Provided / Directly Quenching	Not Provided / Directly Quenching	Not Provided / Directly Quenching	Not Provided / Directly Quenching	Not Provided / Directly Quenching
Material	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel
Insertion Guide Outer Dia. D1(mm)	-	1 ～ 30	2 ～ 20	1 ～ 30	1 ～ 7	0.5 ～ 2.99	3 ～ 30	3 ～ 30	1 ～ 20	1 ～ 7	1 ～ 20	1 ～ 20	1.5 ～ 30	3 ～ 30	1 ～ 20
Insertion Guide Tolerance	0.005/0	0/-0.01 ～ h7	0/-0.01 ～ h7	0/-0.01 ～ h7	0/-0.005 ～ 0.005/0	0/-0.01 ～ 0.005/0	0/-0.01 ～ h7	0/-0.01 ～ h7	0/-0.01 ～ h7	0/-0.005 ～ 0.005/0	0/-0.01 ～ h7	0/-0.01 ～ h7	0/-0.01 ～ h7	0/-0.01 ～ h7	0/-0.01 ～ h7
Mounting Side Outer Dia. d(Ø)	0.5 ～ 3	1 ～ 20	3 ～ 20	1 ～ 20	2 ～ 4	0.51 ～ 3	3 ～ 20	3 ～ 20	2 ～ 20	1 ～ 4	2 ～ 20	2 ～ 20	1 ～ 20	3 ～ 20	2 ～ 20
Mounting Side Tolerance	0.005/0	0.005/0	0.005/0	0.005/0	0.005/0	0.005/0	0.005/0	0.005/0	0.005/0	0.005/0	0.005/0	0.005/0	0.005/0	0.005/0	0.005/0

Loading...