Temperature Sensors Dimensional Drawing
For more information on product dimensional drawings, please refer to the Temperature Sensors product catalog.
Temperature Sensors Specification Table
|
C-KABB-100M | 0.12MM | 0.9×1.2 | Glass Fiber | 100 | 400℃ |
0.25MM | 1.0×1.4 |
Temperature Sensors Product Overview
Temperature Sensors, Thermocouple’s temperature measurement wire
Model: Temperature measurement range: -200 to 260°C (PTFE material) -200 to 500°C (glass fiber material)
Core diameter: 2*Φ0.127mm 2*0.214MM 2*0.511MM
1. It can be widely used in a temperature measurement environment with high accuracy requirements, such as recorders.
2. In addition, the temperature measurement wire solder joint processing service is provided.
3. It can be used with the K -type standard plug or high-temperature plug.
Temperature Sensors Product Feature
* Generic Temperature Sensors products in the market are similar products randomly purchased by our company from online or offline markets.
* The test data are obtained through testing by our company, which are for reference only
Temperature Sensors Related Products
Temperature Sensors Precautions
Temperature Sensors Precautions for usePlease strictly observe the heat resistant temperature of each part in Temperature Sensors product page. Please note that even the upper limit of the temperature measurement is very high, malfunctions such as wire breakage may occur if the heat-resistant temperature is exceeded.
Do not apply large external force or vibration.
■ Temperature Sensors Features· It is used when the temperature measurement point is exposed, so it responds faster than the sheath type.
· Temperature measurement can be performed at the point on the measured object.
Temperature Sensors Usage Method
Couples should not be installed too close to the door and heating place, and the insertion depth should be at least 8 to 10 times the diameter of the protection tube; the interval between the thermocouple protection bushing and the wall is not filled with insulation material, resulting in furnace heat overflow or cold air intrusion. Therefore, the interval between the thermocouple protection bushing and the furnace wall hole should be blocked with refractory mud or asbestos cord or other insulation materials so that the accuracy of temperature measurement will not be affected by hot and cold air convection; The cold end of the thermocouple is too close to the furnace, causing the temperature to rise above 100℃; thermocouples should be as far away as possible from strong magnetic and electric fields, so the thermocouples and power cable should not be installed in the same conduit to avoid deviation caused by interference; thermocouples can not be installed in the area where the measured medium rarely flow. Thermocouples must be installed against the direction of the flow and in full contact with the gas when the tube gas Temperature Sensors is measured by thermocouples.
Temperature Sensors Brand introduction
MISUMI, the head office company, has been providing customers with various high-quality parts such as automation parts, mold parts, electronic parts, tool & consumables, etc. quickly and accurately since its establishment in Japan in 1963. By compiling product catalogs independently and establishing a marketing system for direct sales of products, a low-cost business operation mode has been created, and by making annual product plans according to customers' opinions and requirements, MISUMI brand-name products with high quality level have been continuously developed
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy